MMIX1F520N075T2

MMIX1F520N075T2 Overview

In this case, the MOSFET is susceptible to avalanche breakdown, applied energy is termed avalanche energy, and the avalanche energy rating (Eas) for the MOSFET is 3000 mJ.As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 41000pF @ 25V.This device conducts a continuous drain current (ID) of 500A, which is the maximum continuous current transistor can conduct.Using VGS=75V and a specified value of ID, the drain-source breakdown voltage is VDS at which a specified value of ID flows. This device has a drain-source breakdown voltage of 75V (that is, no charge flow from drain to source).When the device is turned off, a turn-off delay time of 80 ns occurs as the input capacitance charges before drain current conduction commences.Before drain current conduction can begin, the device's turning-on delay time takes time to charge its input capacitance. This delay time is 48 ns.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 20V.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).

MMIX1F520N075T2 Features

the avalanche energy rating (Eas) is 3000 mJ
a continuous drain current (ID) of 500A
a drain-to-source breakdown voltage of 75V voltage
the turn-off delay time is 80 ns

MMIX1F520N075T2 Applications

There are a lot of IXYS
MMIX1F520N075T2 applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching