IXFN80N50

IXFN80N50 Overview

In this case, the MOSFET is susceptible to avalanche breakdown, applied energy is termed avalanche energy, and the avalanche energy rating (Eas) for the MOSFET is 6000 mJ.As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 9890pF @ 25V.This device conducts a continuous drain current (ID) of 80A, which is the maximum continuous current transistor can conduct.Using VGS=500V and a specified value of ID, the drain-source breakdown voltage is VDS at which a specified value of ID flows. This device has a drain-source breakdown voltage of 500V (that is, no charge flow from drain to source).When the device is turned off, a turn-off delay time of 102 ns occurs as the input capacitance charges before drain current conduction commences.Pulsed drain current is maximum rated peak drain current 320A.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 20V.Activation of any electrical operation happens at threshold voltage, and this transistor has 4.5V threshold voltage.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).

IXFN80N50 Features

the avalanche energy rating (Eas) is 6000 mJ
a continuous drain current (ID) of 80A
a drain-to-source breakdown voltage of 500V voltage
the turn-off delay time is 102 ns
based on its rated peak drain current 320A.
a threshold voltage of 4.5V

IXFN80N50 Applications

There are a lot of IXYS
IXFN80N50 applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching