2SK3748-1E

2SK3748-1E Overview

Input capacitance, CI, is defined as the capacitance between two input terminals of an op amp with one input grounded, and the input capacitance of this device is 790pF @ 30V.This device has a continuous drain current (ID) of [4A], which is its maximum continuous current.At a given drain-source breakdown voltage, a specified value of ID will flow. With VGS=1.5kV, the drain-source breakdown voltage is 1.5kV.The turn-off delay time of a device is the time it takes to charge its input capacitance before drain current can flow. The turn-off delay time of a device is 360 ns.MOSFETs have 7Ohm resistance between the drain and the source when biased into the on state by a gate-to-source voltage (VGS).During turn-on, the input capacitance of the device is charged before drain current conduction starts, so its delay time is 17 ns.Gate-source voltage, or VGS, is the voltage across a FET transistor's gate-source terminal, and can be 20V volts.In order to operate this transistor, a voltage of 1500V is needed from the drain to the source (Vdss).Its overall power consumption can be reduced by using drive voltage (10V).

2SK3748-1E Features

a continuous drain current (ID) of 4A
a drain-to-source breakdown voltage of 1.5kV voltage
the turn-off delay time is 360 ns
single MOSFETs transistor is 7Ohm
a 1500V drain to source voltage (Vdss)

2SK3748-1E Applications

There are a lot of ON Semiconductor
2SK3748-1E applications of single MOSFETs transistors.

• Uninterruptible Power Supply
• AC-DC Power Supply
• Synchronous Rectification for ATX 1 Server I Telecom PSU
• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit