XR-2206CP-F

XR-2206CP-F Overview

In the PDIP package, there is an embedded clock generator. There are a total of 16 terminations in this file. A voltage of 12V should be applied to this electronic frequency generator. In this case, TTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 1MHz. A 16 pin is available on the PLL. In addition to having an impressive low-temperature performance, this clock device can perform 0°C operations simultaneously. This RF synthesizer can last with attenuated performance at 70°C. A Analog Waveform Generation Functions clock generator is essentially what this device is. The output frequency is magnified as high as possible with 2 signal outputs. In order to supply this clock PLL, a voltage greater than 26V is not acceptable. This RF synthesizer can operate at a voltage as low as 10V. By operating at a frequency of 1MHz, frequency generator is able to achieve high efficiency. Analog ICs are classified as WAVEFORM GENERATION-devices and this RF synthesizer is one.

XR-2206CP-F Features

Available in the PDIP
Supply voltage of 12V

XR-2206CP-F Applications

There are a lot of Exar Corporation
XR-2206CP-F Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel