TVP5146M1PFP

TVP5146M1PFP Overview

It is embedded in a 80-TQFP Exposed Pad package so that it can be taken anywhere.The encoder should be packed in a Tray case.The mounting of this motor encoder is in the way of Surface Mount.Video Decoder is the type.The encoder connected in Monitors, TV is suitable for this connector.The motor encoder is based on TVP5146 family.The 1.8V 3.3V digital power of the optical encoder are applied to switching power supplies.The optical encoder has 80 terminations.1.8V 3.3V can be used to apply the analog supply voltage to the encoder.Total pin count on the rotary encoders is 80.As shown in the picture, Surface Mount mounts it.In this encoder, you'll find 80 pins.By using the maximum 70°C value, you ensure that the encoder reader will run at a constant speed.The minimum temperature at which this rotary encoder can be operated must not be below 0°C.In general, a higher supply voltage is required than 1.65V.There are electronic rotary encoders in the Color Signal Converters family.As the maximum supply voltage (Vsup) of the encoder motor reaches the zero point, then 1.95V is reached as well.The total number of encoder bits is 10.On it, you will find a 4 A/D converter.2 channels make up the entire system.This rotary encoder can also be used in order to establish IT ALSO REQUIRES 3V TO 3.6V SUPPLY when using it.

TVP5146M1PFP Features

In 80-TQFP Exposed Pad package
Mounting Type: Surface Mount
Base Part Number: TVP5146
80 pins
10 bits
4 A/D Converters
2 channels

TVP5146M1PFP Applications

There are a lot of Texas Instruments TVP5146M1PFP Encoders, Decoders, Converters applications.

• PDAs
• Low power consumption
• Surveillance
• Remote Device Control
• Industrial Automation
• Camera for automotive
• Digital Control
• Cell phones
• Handheld games
• Imaging