Products
Manufacturer
RFQ
NEWS
ContactTSV611ILT
1 Channels 63mA per Channel 1pA 64 dB Instrumentational OP Amps 1.5V~5.5V TSV611 5 Pins SC-74A, SOT-753
- Manufacturer: STMicroelectronics
- NO: 761-TSV611ILT
- Package: SC-74A, SOT-753
- Datasheet:
- Stock: 921
- Description: 1 Channels 63mA per Channel 1pA 64 dB Instrumentational OP Amps 1.5V~5.5V TSV611 5 Pins SC-74A, SOT-753(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TSV611 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 10.5μA |
| Nominal Supply Current | 14μA |
| Output Current | 63mA |
| Slew Rate | 0.04V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 63mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 120 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Power | NO |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
TSV611ILT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. There are two types of operational amplifiers in this circuit. A Cut Tape (CT) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. The pins on this board total to 5 in total. It would be helpful if you could remember that this op amp ic should be powered by an 1.8V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 5 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 10.5μA . There should be no change in the voltage gain at 93dB. On the buffer amps, there are 1 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The instrumentation amplifier is packed in the form of TAPE AND REEL.
TSV611ILT Features
5 Pins
supply voltage of 1.8V
93dB voltage gain
Output Type: Rail-to-Rail
TSV611ILT Applications
There are a lot of STMicroelectronics TSV611ILT Instrumentational OP Amps applications.
- Communication device
- Multimedia playback equipment
- Scintillation detectors
- Power transmission
- Hand-held batteries
- Division circuits
- Commercial audio systems
- Multiplication circuits
- Professional videography
- Communication
