TSA5059ATS/C1,118

TSA5059ATS/C1,118 Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. A Clock PLL is included with the 16-LSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 16 terminations. Clock generator ics require a voltage of 5V. This clock generator receives its inputs from Clock, Crystal, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.7GHz. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock generator would require a maximum supply voltage of 5.25V. The supply voltage (Vsup) should be kept above 4.75V for normal operation. As long as you provide 4.75V~5.25V supply voltage, it will work. Statistics suggest that the ambient temperature be set at -20°C~85°C, which is what is estimated by the test. The RF synthesizer is compatible with Clock, Crystal logic levels. As far as this electronic part is concerned, it can be classified as a PLL Frequency Synthesizer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. TSA5059A is the base part number for finding related electronic parts.

TSA5059ATS/C1,118 Features

Available in the 16-LSSOP (0.173, 4.40mm Width)
Supply voltage of 5V

TSA5059ATS/C1,118 Applications

There are a lot of NXP USA Inc. TSA5059ATS/C1,118 Clock Generators applications.

• Main oscillator in receiver
• Ultrasound diagnosis
• FM demodulation networks for FM operations
• Quenching?
• PCI express cards
• Signal frequency synthesis circuits
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Wide area power system
• Closed circuit systems
• Motor speed controls