Products
Manufacturer
RFQ
NEWS
ContactTS912IDT
2 Channels 40mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS912 8 Pins 8-SOIC (0.154, 3.90mm Width)
- Manufacturer: STMicroelectronics
- NO: 761-TS912IDT
- Package: 8-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 382
- Description: 2 Channels 40mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS912 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Slew Rate | 1.3V/μs |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 10mV |
| Max Junction Temperature (Tj) | 150°C |
| Common Mode Rejection Ratio | 60 dB |
| Dual Supply Voltage | 5V |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Architecture | VOLTAGE-FEEDBACK |
| Unity Gain BW-Nom | 800 kHz |
| Current - Input Bias | 1pA |
| Amplifier Type | General Purpose |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Current - Output / Channel | 75mA |
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Operating Supply Voltage | 8V |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Radiation Hardening | No |
| Number of Pins | 8 |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| REACH SVHC | No SVHC |
| Height | 1.75mm |
| Width | 3.9mm |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C~125°C |
| Technology | CMOS |
| Operating Supply Current | 400μA |
| Bandwidth | 1.4MHz |
| Packing Method | TAPE AND REEL |
| Number of Functions | 2 |
| Nominal Supply Current | 700μA |
| JESD-609 Code | e4 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS912 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Subcategory | Operational Amplifier |
| Power Supplies | 3/10V |
| Ambient Temperature Range High | 125°C |
| Output Current | 40mA |
TS912IDT Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp rates 10mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 400μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 92.04dB is the best course of action. 2 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 8V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
TS912IDT Features
8 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail
TS912IDT Applications
There are a lot of STMicroelectronics TS912IDT Instrumentational OP Amps applications.
- High speed sample
- Commercial audio systems
- Navigation
- Automotive sensors
- Multiplication circuits
- Hand-held batteries
- Non-polarized electrodes
- Radiation thermometry transducers
- High/low-pass filter circuit
- Weak signal detection
