Products
Manufacturer
RFQ
NEWS
ContactTS5A23157RSER
5.7ns, 3.8ns SPDT 10Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS5A23157 10 Pins 1.8V 10-UFQFN
- Manufacturer: Texas Instruments
- NO: 815-TS5A23157RSER
- Package: 10-UFQFN
- Datasheet:
- Stock: 2783
- Description: 5.7ns, 3.8ns SPDT 10Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS5A23157 10 Pins 1.8V 10-UFQFN(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Weight | 7.002332mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A23157 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Polarity | Non-Inverting |
| Power Supplies | 1.8/5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 10μA |
| Turn On Delay Time | 5.7 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 220MHz |
| Turn-Off Delay Time | 3.8 ns |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Channel Capacitance (CS(off), CD(off)) | 5.5pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -66dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 13ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 10Ohm |
| Height | 600μm |
| Length | 1.5mm |
| Width | 2mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A23157RSER Overview
Due to its 10-UFQFN packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 10 terminations. A electrical component with 2 channels is capable of high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 10 series. Based on SPDT switching circuits, these analog multiplexers work. A total of 2 circuits make up this switch device. Try searching for TS5A23157 variants of the analog switch ic. Analog switches have 10Ohm internal resistance. To find out what the 10 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. An effective Single supply digital multiplexer. There should be 1.8V voltage fed to the electrical part below 1.8V. It would be sufficient to run this analogue multiplexer with 1μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 10μA. A 2 input needs to be operated. The transfer of data can be performed over 220MHz bandwidths. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION. The Drain to Source resistance of this electronic component is 10Ohm. In this digital multiplexer, there are 4 outputs.
TS5A23157RSER Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 220MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 10Ohm
TS5A23157RSER Applications
There are a lot of Texas Instruments TS5A23157RSER Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Optical Applications
- Switching Systems
- Data switching
- ISDN NT1/TA
- DSLAMs
- High reliability control systems
- Video switching
- E1 Multiplexer
- FTTH
