Products
Manufacturer
RFQ
NEWS
ContactTS3A24157DGSRG4
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | VSSOP |
| Number of Pins | 10 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| Resistance | 600mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 15nA |
| Nominal Supply Current | 15nA |
| Max Supply Current | 200nA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 40 ns |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Turn-Off Delay Time | 30 ns |
| Off-state Isolation-Nom | 73 dB |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 80ns |
| Signal Current-Max | 0.1A |
| Height | 1.02mm |
| Length | 3mm |
| Width | 3mm |
TS3A24157DGSRG4 Overview
Packed in VSSOP, the electronic component is convenient for shipping overseas. Advanced packaging method Tape and Reel is used to provide high reliability. Total terminations are 10. Due to its 2 channels, the electrical component produces high-quality output. A 1.8V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 10 pins. A 600mOhm internal resistance characterizes this multiplexer. Datasheets for functions of 10 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. For this digital switch to work, 15nA current would suffice. Put voltage above 200nA on the multiplexer to cause damage. 3V operating voltages can be used with this electrical part. In 50MHz-bandwidths, data can be transferred. An environment with a temperature greater than 85°C should not be used to operate the digital switches. The analog switch ics includes 4 outputs.
TS3A24157DGSRG4 Features
2 Channels
15nA Supply Current
Bandwidth: 50MHz
TS3A24157DGSRG4 Applications
There are a lot of Texas Instruments TS3A24157DGSRG4 Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Fiber In The Loop (FITL)
- New designs requiring multiplexer functions
- PDH Multiplexers
- Video signal routing
- MP3 players
- Wireless Local Loop
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- DSUs
- Central office
