Products
Manufacturer
RFQ
NEWS
ContactTS12A4514P
75ns, 45ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS12A4514 8 Pins 1nA 3.3V 8-DIP (0.300, 7.62mm)
- Manufacturer: Texas Instruments
- NO: 815-TS12A4514P
- Package: 8-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 5224
- Description: 75ns, 45ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS12A4514 8 Pins 1nA 3.3V 8-DIP (0.300, 7.62mm)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TS12A4514 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50nA |
| Power Dissipation | 727mW |
| Max Supply Current | 50nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 120 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 520MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 94 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF 7.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | -11.5pC |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Normal Position | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS12A4514P Overview
Presented in 8-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 8. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3.3V voltage supply. An electrical component of this type can be found in the 8 series. The analog switch ics are built using SPST - NO switching circuits. Search with TS12A4514 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 15Ohm. The functions of 8 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Analogue multiplexer with a Single supply type that is cost-effective. 2V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 50nA current. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 50nA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating 1 inputs is required. There are 520MHz bandwidths for data transfer.
TS12A4514P Features
1 Channels
Switch Circuit: SPST - NO
50nA Supply Current
Bandwidth: 520MHz
TS12A4514P Applications
There are a lot of Texas Instruments TS12A4514P Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Remote Powered Equipment
- Cellular phones
- Sample-and-hold systems
- Precision data acquisition
- Battery Powered Systems
- Medical Instrumentation
- Communication systems
- Intelligent PBX
- Switching Systems
