TPS51117RGYR

In the 14-VFQFN Exposed Pad package, the switching controller meets most application requirements. dc motor controller is suitable for 1  output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 4.5V~5.5V. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Enable, On Time Control, Power Good for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. A variety of terminations with 14 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Other relevant dc to dc converter ics will be returned if you search "TPS51117". 14 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 5.5V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. 550kHz is the maximum frequency of this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V is used to better suit the DC to DC voltage regulator's situation. It is suggested that users apply 5.5V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Basically, it's a dc to dc voltage regulator from the D-CAP? series. DC switching uses 400μA when it is dormant. Because the dc switcher's maximum input voltage is 28V users must limit the voltage accordingly. 1.8V is the required supply voltage. DC switcher will not be able to provide an output current above 10A volts. At its maximum, the switching converter can output 5.5V volts. voltage controllers with a minimum voltage output of 760mV cannot operate. 300kHz is the frequency at which this controller can mostly perform fine.

Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
Switching Frequency: 300kHz

There are a lot of Texas Instruments TPS51117RGYR DC to DC converter applications.