Products
Manufacturer
RFQ
NEWS
ContactTMCM-3110-TMCL
TMCM-3110-TMCL datasheet pdf and Motor Driver Boards, Modules product details from Trinamic Motion Control GmbH stock available at Feilidi
- Manufacturer: Trinamic Motion Control GmbH
- NO: 804-TMCM-3110-TMCL
- Package: -
- Datasheet:
- Stock: 9297
- Description: TMCM-3110-TMCL datasheet pdf and Motor Driver Boards, Modules product details from Trinamic Motion Control GmbH stock available at Feilidi(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Chassis Mount |
| Operating Temperature | -30°C~40°C |
| Published | 2014 |
| Series | TMCM |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Board |
| Voltage - Supply | 24V~48VDC |
| Output Voltage | 48V |
| Interface | RS-485, USB |
| Current - Output | 2.8A |
| Voltage - Load | 9V~52.8V |
| Motor Type | Stepper |
| Control / Drive Type | Stepper, Bipolar |
| Number of Motors | 3 |
| Length | 100.076mm |
| Width | 130.048mm |
| RoHS Status | ROHS3 Compliant |
TMCM-3110-TMCL Description
For 2-phase bipolar stepper motors, the TMCM-3110 is a small 3-axes stepper motor controller/driver module. It offers a straightforward handling, is highly integrated, and can be applied to a variety of decentralized applications. The TMCM-3110 supports up to three bipolar stepper motors, each having a maximum coil current of 2.8A RMS and nominal supply voltages of +48V DC.
Each motor has a unique incremental encoder (a/b/n) connector as well as a separate motor, reference/end switch connector. RS485, CAN, or USB interfaces are all capable of supporting communication. For a variety of possible applications, the module provides 8 general-purpose inputs and 8 general-purpose outputs. The cost of power consumption is maintained low because to TRINAMIC's coolStepTM technology's exceptional energy efficiency.
TMCM-3110-TMCL Features
Up to 8 multi-purpose inputs (+24V compatible, incl. 2 dedicated analog inputs)
Up to 8 multi-purpose outputs (Open-drain, incl. 2 outputs for currents up to 1A)
Inputs for 3 incremental encoders (differential and TTL / open-drain)
S/D in for all three axes (as alternative to on-board motion controller)
RS485 communication interface (9pin D-SUB male)
CAN 2.0B communication interface (9pin D-SUB male)
USB 2.0 full-speed (12Mbit/s) communication interface (mini-USB connector)
Up to 256 microsteps per full step
High-efficient operation, low power dissipation
Dynamic current control
Integrated protection
stallGuard2 feature for stall detection
coolStep feature for reduced power consumption and heat dissipation
TMCM-3110-TMCL Applications
Temperature Measurement
Pressure Measurement
Flow Meters
Factory Automation and Process Control
