You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Radiation Hardening | No |
| Number of Pins | 20 |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Max Supply Voltage | 5.5V |
| REACH SVHC | No SVHC |
| Min Supply Voltage | 3V |
| Frequency | 25MHz |
| Height | 1.2mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Mounting Type | Surface Mount |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Max Supply Current | 17mA |
| Number of Functions | 1 |
| Nominal Supply Current | 28mA |
| Type | Linear |
| Max Input Voltage | 5.5V |
| JESD-609 Code | e4 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TLC59108 |
| Pin Count | 20 |
| Surface Mount | YES |
| Terminal Pitch | 0.65mm |
| Subcategory | Display Drivers |
| Power Supplies | 3.3/5V |
| Number of Outputs | 8 |
| Output Current | 120mA |
| Voltage - Output | 17V |
| Max Output Current | 120mA |
| Min Input Voltage | 3V |
| Output Characteristics | CONSTANT-CURRENT |
| Number of Segments | 8 |
| Switching Frequency | 1MHz |
| Topology | Boost |
| Multiplexed Display Capability | NO |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
The TLC59108IPWR is an 8-bit LED driver operated by the I2C bus and designed for red/green/blue/amber (RGBA) color mixing and backlighting. Each LED output has its own fixed-frequency individual PWM controller with an 8-bit resolution (256 steps) that runs at 97kHz and a duty cycle range of 0 to 99.6%. Each LED can be tuned to a different brightness level using the individual PWM controller. A group PWM controller with an additional 8-bit resolution (256 steps) has a fixed frequency of 190Hz and an adjustable frequency of 24Hz to once every 10.73 seconds, with a duty cycle of 0 to 99.6%. The group PWM controller dims or blinks all of the LEDs at the same time with the same value. At both individual and group PWM controller levels, each LED output can be turned off, on (no PWM control), or set to its individual PWM controller value. Up to 14 devices can be connected to the same bus using four hardware address pins.
Active-low reset
Supports hot insertion
No glitch on power-up
Internal power-on reset
Green product and no Sb/Br
17V Maximum output voltage
Noise filter on SCL/SDA inputs
8 Constant-current output channels
Software enable and disable for I2C bus address
Constant output current adjusted through an external resistor
25MHz internal oscillator requires no external components
The software reset feature (SWRST Call) allows the device to be reset through the I2C bus
Industrial
LED Lighting
Hobby & Education
Please send RFQ , we will respond immediately.