Products
Manufacturer
RFQ
NEWS
ContactTLC339IPWG4
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 700mW |
| Nominal Supply Current | 80μA |
| Power Dissipation | 700mW |
| Max Supply Current | 20μA |
| Current - Output | 20mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 1 μs |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 30nA |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Max Input Current | 5pA |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
TLC339IPWG4 Overview
In order to make transportation easier, it is packaged in TSSOP .Electronic comparator is shipped by Rail/Tube .The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type General Purpose .A total of 14 pins are included.The comparator consists of 14 pins.As a result, this comparator displays a quiescent current of 125μA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 80μA for normal use.A current supply greater than 20μA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input up to 5pA current into the device.Comparator electronics is not recommended to maintain a temperature above 85°C .A temperature below -40°C is not suitable for the device.The comparator has a maximum supply voltage of 16V .A minimum supply voltage of 3V is permitted for this comparator.As a result, 4 channels work together to maintain the quality of the output.Comparator electronics is necessary to have a voltage of 5V for normal operation.Its output current is rated as 20mA .
TLC339IPWG4 Features
General Purpose IC
Quiescent Current: 125μA
TLC339IPWG4 Applications
There are a lot of Texas Instruments TLC339IPWG4 linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- RC Timers
- Infotainment and Clusters
- Limit Comparators
- DC/DC and AC/DC power supplies
- Factory automation & control
- Wearable Devices
- Automotive
- General-Purpose Portable Devices
- Mobile Communications
