TLC2934IPWR

TLC2934IPWR Overview

It is packaged using the Cut Tape (CT) method since it is a clock IC. In the 14-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 14 terminations to be found. For this clock generator ic, a voltage of 3.3V is required. There is a Clock PLL called Clock which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. 130MHz is the maximal value for normal operation. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generators can take up to 3.45V of power as a maximum supply voltageClock generators should operate with the voltage supply of 3.15V~3.45V. Statistics suggest that the ambient temperature be set at -20°C~75°C, which is what is estimated by the test. This electronic component can be classified into Phase Lock Loop (PLL). An IC that generates clocks specifically for microprocessors, this clock PLL is 14-bits in si14e. You can find related electrical components to the base part number TLC2934. A 14 pin is available on the PLL. There is a maximum supply voltage of 3.3V that frequency generators can handle.

TLC2934IPWR Features

Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

TLC2934IPWR Applications

There are a lot of Texas Instruments TLC2934IPWR Clock Generators applications.

• Televisions
• Local oscillators (LOs)
• Laptops
• HDD recorders
• Satellite navigation communication
• Walkie-talkies
• Ultrasound diagnosis
• Simple clock clean-up circuits
• MRI
• Microprocessor clock multipliers