TLC2933IPWR

TLC2933IPWR Overview

Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 14-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 14 terminations. To operate this time clock generator, 3V voltage should be applied. This clock generator receives its inputs from CMOS, which is designed to be the clock source. 1 circuits are implemented to access the electronic component's full performance. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There should be 2.85V~5.25V provided with this RF synthesizer. Test statistics estimate a temperature of -20°C~75°C, which should be set as the ambient temperature. A Phase Lock Loop (PLL) is a classification for the electronic part in question. This clock-generating IC is a 14-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number TLC2933. It is possible to connect to the PLL via 14 pins. The supply voltage should be maintained at 5V for high efficiency. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. For better clock signal output, this clock PLL is featured with IT CAN ALSO OPERATE FROM A 4.75V TO 5.25V SUPPLY. By operating at a frequency of 100MHz, RF synthesizer is able to reali100MHze high efficiency. For this analog clock generator, a maximum supply current of 35mA should be avoided.

TLC2933IPWR Features

Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

TLC2933IPWR Applications

There are a lot of Texas Instruments TLC2933IPWR Clock Generators applications.

• Telecommunication systems
• Radar
• Ports
• Microwave backhaul IF
• Microprocessor clock multipliers
• Deep space exploration
• Microwave point-to-point systems
• Symbol synchronization
• Test and instrumentation equipment
• Microwave radio