TLC2933AIPWRG4

TLC2933AIPWRG4 Overview

In order to package it as a clock IC, the Tape & Reel (TR) package is used. Embedded in the TSSOP package is this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As you can see, it consists of 14 terminations. Basically, a voltage of 3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. RF synthesizers based on this clock provide frequencies up to 110MHz maximum. Microprocessors are specifically designed to use this clock-generating IC, which has a 14-bit output. There is a 14 pin that is available on the frequency synthesizers. Featuring an impressive low-temperature operating performance and -20°C functions, this clock generator is sure to impress. At 75°C, this RF synthesizer remains functional despite reduced performance. Clock PLL is capable of handling a voltage of 5V. As a result, it is commonly classified as a type of PLL or Frequency Synthesis Circuits clock PLL. To supply this clock PLL, a voltage higher than 5.25V is unacceptable. With this clock generator, the supply voltage is limited to 2.85V. Frequency generator is able to reali130MHze high efficiency when operating at a frequency of 130MHz. As an analog IC, this RF synthesizer falls under the PHASE LOCKED LOOP-device category.

TLC2933AIPWRG4 Features

Available in the TSSOP
Supply voltage of 3V
Operating supply voltage of 5V

TLC2933AIPWRG4 Applications

There are a lot of Texas Instruments TLC2933AIPWRG4 Clock Generators applications.

• Microwave backhaul IF
• Frequency synthesis
• Broadcast communication
• Instrument
• FSK demodulators
• PMR (Professional Mobile Radio)
• Remote telemetry and instrumentation
• Bluetooth transmitters
• Local oscillators (LOs)
• Satellite receivers