TLC2933AIPWG4

TLC2933AIPWG4 Overview

As a clock IC, PLLs is packaged using the Tube method. 14-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 14 terminations to be found. Basically, this time clock generator needs a voltage of 3V. In this clock generator, CMOS is used as the input to the clock. Using 1 circuits, the electronic part's full performance can be accessed. Providing a maximum frequency of 110MHz, this clock-based RF synthesizer is suitable for a variety of applications. Because of the Surface Mount, clock PLL can be easily mounted on the panel. In terms of supply voltage, RF synthesizer works with 2.85V~5.25V. As determined by the test statistics, the ambient temperature should be set to -20°C~75°C. This electronic component is usually classified as a Phase Lock Loop (PLL) component. Microprocessor-specific clock PLL with 14 bits. The related electrical components for the base part number TLC2933 can be found below. There are 14 pins on the frequency generator that are available for use. There is a maximum supply voltage of 5V that this analog clock generator can handle. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. High efficiency is achieved when operating at a frequency of 130MHz. There should be no more than 55mA of supply current for this time clock generator.

TLC2933AIPWG4 Features

Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

TLC2933AIPWG4 Applications

There are a lot of Texas Instruments TLC2933AIPWG4 Clock Generators applications.

• Signal modulation and demodulation
• Carrier synchronization in wired communication
• CB radios
• Radio receivers
• Coherent carrier tracking
• 10 Gigabit Ethernet
• MRI
• Precision auxiliary angle deflection measurement
• Tracking filters
• FSK demodulators