TLC2932AIPWRG4

TLC2932AIPWRG4 Overview

As a clock IC, it uses the Tape & Reel (TR) package. TSSOP contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 14 terminations. For this clock generator ic, a voltage of 5V is required. This Clock PLL will be fed by CMOS as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 55MHz, this clock-based RF synthesizer is suitable for a variety of applications. In particular, this clock PLL is designed to be used with microprocessors. There is a 14 pin that is available on the digital clock generator. Despite its low operating temperature, this clock generator has -20°C operations. There is even a possibility that this clock generator ic will last even when the temperature is 75°C. The maximum supply voltage that clock generator can handle is 5V. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO REQUIRES 3V AND 3.3V SUPPLY. There can be no voltage higher than 5.25V when powering this frequency generator. This RF synthesizer can handle voltages as low as 2.85V. At a frequency of 75MHz, the system can achieve high efficiency. It is classified as a PHASE LOCKED LOOP-electronic frequency generator since it is an analog IC.

TLC2932AIPWRG4 Features

Available in the TSSOP
Supply voltage of 5V
Operating supply voltage of 5V

TLC2932AIPWRG4 Applications

There are a lot of Texas Instruments
TLC2932AIPWRG4 Clock Generators applications.

• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems
• Medical equipment
• Multi-function printers