Products
Manufacturer
RFQ
NEWS
ContactTL071CPE4
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 10mV |
| Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 18V |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 2.5mA |
| Slew Rate | 13 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200pA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Micropower | NO |
| Min Dual Supply Voltage | 3.5V |
| Bias Current-Max (IIB) @25C | 0.0002μA |
TL071CPE4 Overview
Packaging for the buffer amplifier is in the form of a PDIP case. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. In the case of Rail/Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Op amp ic rates 10mV for input offset voltage. Operational amplifier can operate supply current at 1.4mA. Voltage gain should remain at 106.02dB. It should not lower than -40°C to operate buffer amplifier. You should only use op amp buffer at temperatures that are no higher than 85°C. The op amp is rated for an operating supply voltage of 1. With regard to the supply voltage, this electrical component is capable of working from under 18V. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part.
TL071CPE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL071CPE4 Applications
There are a lot of Texas Instruments TL071CPE4 Instrumentational OP Amps applications.
- Image computer boards
- Power control
- Oscilloscopes
- Gaming industry
- earphone
- Tablets
- Displayers for aircraft and air transportation control systems
- Laptop
- Weighing systems
- Automatic control
