SY100S834LZG

SY100S834LZG Overview

The Tube method is used for packaging clock ICs. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. As the Clock PLL's input, ECL, PECL is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL works with 3V~3.8V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. Clock logic levels are supported by this RF synthesizer. This electronic component can be classified as a Clock Generator. These related electrical parts are available for the base part number SY100S834. There are 16 pins that are available on the frequency generator. Designed to operate at low temperatures, this frequency generator performs -40°C operations per second. The operating temperature should be lower than 85°C. There is a maximum supply voltage of 3.3V that frequency generators can handle. Precision Edge? series electronic parts are used in this part. Clock PLL is facilitated with 3 signal outputs to magnify output frequency as high as possible. This time clock generator requires a supply current of 49mA in order to operate properly. Data input is combined with logic clock function Clock to create this RF synthesizer.

SY100S834LZG Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Operating supply voltage of 3.3V

SY100S834LZG Applications

There are a lot of Microchip Technology SY100S834LZG Clock Generators applications.

• Phase modulation cellular systems
• Mechanical devices
• Microprocessor clock multipliers
• Digital circuits
• Communication infrastructure
• Microwave backhaul IF
• 1 Gigabit Ethernet
• Time to digital converters
• Jitter reduction
• Frequency Modulation (FM) stereo decoders