STM32F413ZHT6

STM32F413ZHT6   Description

The STM32F413XG/H device is based on a high-performance ARM Cortex - M4 32-bit RISC core and operates at up to 100 MHz. Its Cortex - M4 core uses floating-point unit (FPU) single-precision, supporting all ARM single-precision data processing instructions and data types. It also implements a complete set of DSP instructions and memory protection unit (MPU) to enhance the security of the application. STM32F413XG/H devices belong to the STM32F4 Access product line, which combines energy efficiency, performance, and integration, while adding a new and innovative feature called batch acquisition Mode (BAM), which saves more power during batch processing. The STM32F413XG/H device integrates high-speed embedded memory (up to 1.5m bytes of flash memory, 320K bytes of SRAM), as well as various enhanced iCandle O and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. All devices offer a 12-bit ADC, two 12-bit DAC, a low-power RTC, 12 general-purpose 16-bit timers, including two PWM timers for motor control, two general-purpose 32-bit timers and a low-power timer.

STM32F413ZHT6    Features

? Dynamic Efficiency Line with eBAM (enhanced

Batch Acquisition Mode)

– 1.7 V to 3.6 V power supply

– -40 °C to 85/105/125 °C temperature range

? Core: Arm? 32-bit Cortex?-M4 CPU with FPU,

Adaptive real-time accelerator (ART

Accelerator?) allowing 0-wait state execution

from Flash memory, frequency up to 100 MHz,

memory protection unit, 125 DMIPS/

1.25 DMIPS/MHz (Dhrystone 2.1), and DSP

instructions

? Memories

– Up to 1.5 Mbytes of Flash memory

– 320 Kbytes of SRAM

– Flexible external static memory controller

with up to 16-bit data bus: SRAM, PSRAM,

NOR Flash memory

– Dual mode Quad-SPI interface

? LCD parallel interface, 8080/6800 modes

? Clock, reset and supply management

– 1.7 to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– 4-to-26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

? Power consumption

– Run: 112 μA/MHz (peripheral off)

– Stop (Flash in Stop mode, fast wakeup

time): 42 μA Typ.; 80 μA max @25 °C

– Stop (Flash in Deep power down mode,

slow wakeup time): 15 μA Typ.;

46 μA max @25 °C

– Standby without RTC: 1.1 μA Typ.;

14.7 μA max at @85 °C

– VBAT supply for RTC: 1 μA @25 °C

? 2x12-bit D/A converters

? 1×12-bit, 2.4 MSPS ADC: up to 16 channels

? 6x digital filters for sigma delta modulator,

12x PDM interfaces, with stereo microphone

and sound source localization support

? General-purpose DMA: 16-stream DMA

STM32F413ZHT6    Applications

security of the application