Products
Manufacturer
RFQ
NEWS
ContactSTG6384QTR
55ns, 30ns SPST - NO 1.3Ohm QUAD Analog Switches BREAK-BEFORE-MAKE STG5684 10 Pins 100nA 1.8V 10-UFQFN
- Manufacturer: STMicroelectronics
- NO: 761-STG6384QTR
- Package: 10-UFQFN
- Datasheet:
- Stock: 1461
- Description: 55ns, 30ns SPST - NO 1.3Ohm QUAD Analog Switches BREAK-BEFORE-MAKE STG5684 10 Pins 100nA 1.8V 10-UFQFN(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 10mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.12W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | STG5684 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/4V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 50nA |
| Max Supply Current | 50nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 55 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 65MHz |
| On-State Resistance (Max) | 1.3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 85pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 55ns, 30ns |
| Charge Injection | 49pC |
| Channel-to-Channel Matching (ΔRon) | 10m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 85ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.55mm |
| Length | 1.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STG6384QTR Overview
Presented in 10-UFQFN, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 10 terminations totally. This electronic part offers high-quality output due to its 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 10 series. These analog multiplexers are built based on SPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. Use STG5684 to search for variants of the digital switches. In this multiplexer, the internal resistance is 10mOhm. Datasheets for functions of 10 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. 50nA current would be enough for this multiplexer to operate. The voltage required by this switch device is 1.65V~4.3V, draining from a single voltage supply. When the digital multiplexer is charged above 50nA, damage can occur. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
STG6384QTR Features
1 Channels
Switch Circuit: SPST - NO
50nA Supply Current
-3db Bandwidth: 65MHz
STG6384QTR Applications
There are a lot of STMicroelectronics STG6384QTR Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cross Connects
- E1 Multiplexer
- Access Concentrators
- DSLAMs
- Relay Replacement
- CSU
- Sample hold systems
- Automotive applications
