SN74LV4046ANSG4

SN74LV4046ANSG4 Overview

There is a clock generator embedded in the SOP package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains 16 terminations that can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.6V. CMOS is designed as this clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. It provides a maximum frequency of 38MHz. Microprocessor-specific clock PLL with 16 bits. A 16 pin is available on the PLL. This clock generator ic has an impressive low-temperature operating performance and is capable of -40°C operations. At a temperature of 125°C, the clock generator ic can operate with attenuated performance. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. There is no point in supplying this frequency generator with a voltage higher than 5.5V. This RF synthesizer can operate at a voltage as low as 3V. At a frequency of 38MHz, the system can achieve high efficiency. It can be classified as a PHASE LOCKED LOOP-clock PLL because it is an analog IC.

SN74LV4046ANSG4 Features

Available in the SOP
Supply voltage of 3.6V

SN74LV4046ANSG4 Applications

There are a lot of Texas Instruments SN74LV4046ANSG4 Clock Generators applications.

• Myriad digital applications
• VSAT (Small Ground Satellite Station)
• Line cards used in telephone exchange
• Clock signals to the high-speed Digital RF circuits
• Melting
• Radar
• Frequency synthesis
• Local oscillators (LOs)
• Small signal recovery
• Clock generation systems