SL28SRC01BZIT

SL28SRC01BZIT Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. As the Clock PLL's input, Clock, Crystal is designed to be used in order to generate the clock signal. There is a maximum frequency of 100MHz Max with this clock-based frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. This RF synthesizer has CLOCK GENERATOR, OTHER uPs, uCs, and peripheral ICs. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. The temperature should be set at -40°C~85°C to ensure reliable performance. I would like to present to you a frequency synthesizer that is compatible with HCSL logic levels. It is a 14-bit IC that is designed for microprocessors specifically. You can find related electrical components to the base part number SL28SRC01. The clock PLL has 16 pins that are available. There is a maximum supply voltage of 3.3V that frequency generators can handle. And basically, this clock generator is often classified as a kind of Clock Generators. The output frequency is magnified as high as possible with 1 signal outputs. Elemental destruction can occur when the supply current is exceeded (higher than 40mA)

SL28SRC01BZIT Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

SL28SRC01BZIT Applications

There are a lot of Silicon Labs SL28SRC01BZIT Clock Generators applications.

• Navigation, positioning and surveillance system for aircraft, ships and ships
• Phase modulation cellular systems
• Mixed mode (analog and digital) applications
• Integrated phase noise in aerospace systems
• Clock recovery
• Automatic control
• PMR (Professional Mobile Radio)
• Walkie-talkies
• FPGA and processor clocks
• Skew suppression