SL28SRC01BZI

SL28SRC01BZI Overview

In order to package it as a clock IC, the Tube package is used. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. There are a total of 16 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. In this clock generator, Clock, Crystal is used as the input to the clock. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 100MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. CLOCK GENERATOR, OTHER uPs/uCs/peripheral ICs are incorporated in this digital clock generator. This clock PLL works with a supply voltage of 3.135V~3.465V. The temperature should be set at -40°C~85°C to ensure reliable performance. There are several logic levels in HCSL logic that can be used with this clock generator. It is a 16-bit clock PLL designed specifically for microprocessors. The related electrical components for the base part number SL28SRC01 can be found below. A 16 pin is available on the clock PLL. RF synthesizers can handle voltages up to 3.3V. Clock generator can also be included into Clock Generators. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. For the clock time generator to function properly, 40mA of supply current must be provided.

SL28SRC01BZI Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

SL28SRC01BZI Applications

There are a lot of Silicon Labs SL28SRC01BZI Clock Generators applications.

• Electronic equipment
• PCI express cards
• Microwave point-to-point systems
• Wireless infrastructure
• Digital HDTV systems
• Microprocessor clock multipliers
• Wi-Fi routers
• Reference signals to RF systems
• High-speed communication applications
• 1 Gigabit Ethernet