SL23EP08SC-4

SL23EP08SC-4 Overview

As a clock IC, it uses the Tube package. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. There are 16 terminations found in the file. The supply voltage of 2.5V allows for high efficiency. This clock generator receives its inputs from Clock, which is designed to be the clock source. To access the electronic component's full performance, 1 circuits are implemented. 220MHz is the maximal value for normal operation. With the Surface Mount, it is easy to install this electric component on the panel. The maximal supply voltage this clock generator would take is 2.7V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. Clock PLL works with 2.3V~3.6V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. Clock PLL is equipped with 16 pin count. These related electrical parts are available for the base part number SL23EP08. PF synthesizers is equipped with 16 pins. This clock PLL features ALSO OPERATES WITH 3.3V SUPPLY for better clock signal output. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns.

SL23EP08SC-4 Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-4 Applications

There are a lot of Silicon Labs SL23EP08SC-4 Clock Generators applications.

• Ultrasound diagnosis
• Antenna automatic tracking
• Phase modulation cellular systems
• Cellular/4G
• Integrated phase noise in aerospace systems
• Reference signals to RF systems
• Wireless handsets
• PMR (Professional Mobile Radio)
• Various decoding circuits
• Coherent carrier tracking