SL23EP08SC-2T

SL23EP08SC-2T Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The 16-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. Frequency generator can maintain a maximum temperature of NOT SPECIFIED under reflowing conditions. As a result, frequency synthesizers can be found to contain 16 terminations. For this clock generator ic, a voltage of 2.5V is required. This Clock PLL will be fed by Clock as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. RF synthesizers based on this clock provide frequencies up to 220MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Approximately 2.7V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 2.3V. There are 2.3V~3.6V available for use with this clock PLL. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. The RF synthesizer is compatible with LVCMOS logic levels. It is a 16-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number SL23EP08. There are a number of 16 pins that are available on the frequency synthesizers. This frequency synthesizer features ALSO OPERATES WITH 3.3V SUPPLY to produce better clock signals. Clock PLL has 8 signal outputs to maximi8e output frequency. At 0.5 ns Max, this clock generator offers low timing skew.

SL23EP08SC-2T Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-2T Applications

There are a lot of Silicon Labs SL23EP08SC-2T Clock Generators applications.

• Wi-Fi routers
• Closed circuit systems
• Automatic control
• Mobile telephones
• Electronic countermeasures
• Frequency shifting decodes
• Bluetooth transmitters
• Televisions
• Pulsed digital systems
• Reference signals to RF systems