SL23EP08SC-1T

SL23EP08SC-1T Overview

Clock ICs are packaged using the Tape & Reel (TR) method. There is a clock generator embedded in the 16-SOIC (0.154, 3.90mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of NOT SPECIFIED. There are 16 terminations found in this file. A voltage of 2.5V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be Clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 220MHz, this clock-based RF synthesizer is suitable for a variety of applications. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximum voltage this clock PLL can handle is 2.7V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. There are 2.3V~3.6V available for use with this clock PLL. The temperature should be set at 0°C~70°C to ensure reliable performance. LVCMOS is designed for clock generator's output. It is a 16-bit IC that is designed for microprocessors specifically. You can find related electrical components to the base part number SL23EP08. There is an available 16 pin on the PLL. A frequency synthesizer with ALSO OPERATES WITH 3.3V SUPPLY features better clock signal output. 8 signal outputs maximi8e the output frequency. There is a low timing skew at 0.5 nsmax with this RF synthesizer.

SL23EP08SC-1T Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-1T Applications

There are a lot of Silicon Labs SL23EP08SC-1T Clock Generators applications.

• Computers to manage memory cards
• Test equipment
• Coherent carrier tracking
• Digital logic circuits
• Frequency synthesis
• High-speed communication applications
• Medical equipment
• Antenna automatic tracking
• FMCW Radar
• Fiber Channel