SL23EP08SC-1HT

SL23EP08SC-1HT Overview

As a clock IC, it uses the Tape & Reel (TR) package. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are 16 terminations found in this file. This clock generator ic should receive a voltage of 2.5V. Clock is designed as this clock generator's input. For a full understanding of the electronic part's performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 220MHz. PLL clock is mounted in the way of Surface Mount. There is a maximum voltage of 2.7V for this clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. There are 2.3V~3.6V different supply voltages that can be provided for this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. This is a clock generator compatible with LVCMOS logic levels. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. These related electrical parts are available for the base part number SL23EP08. A 16 pin is available on the PLL. This clock PLL features ALSO OPERATES WITH 3.3V SUPPLY for better clock signal output. The output frequency can be amplified as high as possible with its 8 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.5 ns max.

SL23EP08SC-1HT Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-1HT Applications

There are a lot of Silicon Labs SL23EP08SC-1HT Clock Generators applications.

• PMR (Professional Mobile Radio)
• Microwave radio
• Cable television converter boxes
• Electronic countermeasures
• Aerospace and defense
• Remote telemetry and instrumentation
• Wide area power system
• Test equipment
• VSAT (Small Ground Satellite Station)
• Signal frequency synthesis circuits