SL23EP08SC-1

SL23EP08SC-1 Overview

Clock generator is packaged in the way of Tube. As part of the 16-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of NOT SPECIFIED. There are 16 terminations found in the file. The clock generator ic should be grounded with a voltage of 2.5V. It is designed that the Clock PLL's input should be Clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. An up to 220MHz frequency is provided by this clock-based RF synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. There should be a voltage supply above 2.3V for this frequency generator in order to ensure its safety. This clock PLL works with a supply voltage of 2.3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. It's compatible with LVCMOS logic levels. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number SL23EP08 are listed below. The clock PLL has 16 pins that are available. A frequency synthesizer with ALSO OPERATES WITH 3.3V SUPPLY features better clock signal output. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. The timing skew of this frequency synthesizer is low at 0.5 nsmax.

SL23EP08SC-1 Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-1 Applications

There are a lot of Silicon Labs SL23EP08SC-1 Clock Generators applications.

• Pagers
• Tracking filters
• Laptops
• 1 Gigabit Ethernet
• Coherent detection of the signal
• Camera systems
• Microwave backhaul IF
• 10 Gigabit Ethernet
• Jitter reduction
• PCI express cards