SL23EP05SI-1HT

SL23EP05SI-1HT Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of NOT SPECIFIED when reflowing. In it, there are 8 terminations to be found. The clock generator ic should be grounded with a voltage of 3.3V. Clock is designed as this clock generator's input. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 220MHz. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. There should be 2.3V~3.6V provided with this RF synthesizer. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. It's compatible with LVCMOS logic levels. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. These related electrical parts are available for the base part number SL23EP05. It is possible to connect to the PLL via 8 pins. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. As a result of this digital clock generator, there is a low timing skew at 0.09 ns max.

SL23EP05SI-1HT Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

SL23EP05SI-1HT Applications

There are a lot of Silicon Labs SL23EP05SI-1HT Clock Generators applications.

• Wi-Fi routers
• Signal generator
• VSAT (Small Ground Satellite Station)
• Electronic equipment
• Wireless handsets
• Telecommunication systems
• Test and instrumentation equipment
• Deep space exploration
• Closed circuit systems
• Clock synchronization