SL23EP05SI-1H

SL23EP05SI-1H Overview

In order to package it as a clock IC, the Tube package is used. The 8-SOIC (0.154, 3.90mm Width) package includes this clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of NOT SPECIFIED. As you can see, it consists of 8 terminations. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from Clock, which is designed to be the clock source. Using 1 circuits, the electronic part's full performance can be accessed. A clock-based RF synthesizer that provides a max frequency of 220MHz is available. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There are 2.3V~3.6V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at -40°C~85°C to ensure reliable performance. There are several logic levels in LVCMOS logic that can be used with this clock generator. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. The related electronic parts of part number SL23EP05 are listed below. There is a 8 pin that is available on the frequency synthesizers. 5 signal outputs are provided for enhancing output frequency as much as possible. The maximal same edge skew (tskwd) can not be exceeded.

SL23EP05SI-1H Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

SL23EP05SI-1H Applications

There are a lot of Silicon Labs SL23EP05SI-1H Clock Generators applications.

• CPUs
• PMR (Professional Mobile Radio)
• Carrier synchronization in wired communication
• Phase modulation cellular systems
• Jitter reduction
• Closed circuit systems
• Telecommunication systems
• FM demodulation networks for FM operations
• Bluetooth transmitters
• Broadcast communication