SL23EP04SI-2T

SL23EP04SI-2T Overview

Tape & Reel (TR)-method packaging is used for clock ICs. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. 8 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 2.5V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. There is a maximum frequency of 220MHz Max with this clock-based frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL is capable of receiving a maximum of 2.75V as a supply voltage. Keeping the supply voltage for this frequency synthesizer above 2.25V is recommended for safety reasons. As long as you provide 2.97V~3.63V supply voltage, it will work. The temperature should be set at -40°C~85°C to ensure reliable performance. This is a clock generator compatible with LVCMOS logic levels. The clock-generating IC is a 8-bit device designed specifically for microprocessors. SL23EP04 is the base part number for finding related electronic parts. There is an available 8 pin on the PLL. This frequency synthesizer features ALSO OPERATES WITH 3.3V SUPPLY to produce better clock signals. At 0.25 ns Max, this analog clock generator exhibits low timing skew.

SL23EP04SI-2T Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP04SI-2T Applications

There are a lot of Silicon Labs SL23EP04SI-2T Clock Generators applications.

• Local oscillator source in receiver
• Frequency synthesis
• FPGA and processor clocks
• Quenching?
• Clock generation systems
• Test equipment
• Multi-function printers
• FM demodulation networks for FM operations
• Automatic control
• Navigation, positioning and surveillance system for aircraft, ships and ships