SL2305SI-1T

SL2305SI-1T Overview

The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of NOT SPECIFIED. There are 8 terminations found in this file. Clock generator ics require a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. 1 circuits are implemented to access the electronic component's full performance. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 140MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageA maximum voltage of 3V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. In particular, this clock PLL is designed to be used with microprocessors. According to the base part number SL2305, its related parts can be found. A 8 pin is available on the clock PLL. Supply voltage 3.3V is what time clock generator can handle.

SL2305SI-1T Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

SL2305SI-1T Applications

There are a lot of Silicon Labs SL2305SI-1T Clock Generators applications.

• GPS systems
• Wi-Fi routers
• Digital switching systems
• Cell phones
• Infotainment systems
• Skew suppression
• FMCW Radar
• Ports
• Broadcast communication
• 1 Gigabit Ethernet