SL16010DC

SL16010DC Overview

A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. The 10-WFDFN Exposed Pad package embeds this Clock PLL. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. 10 terminations can be found in frequency generators. For this clock generator ic, a voltage of 3.3V is required. In this case, Clock, Crystal is designed to be the input of the clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. An up to 100MHz frequency is provided by this clock-based RF synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, OTHER. Clock PLL works with 2.97V~3.63V supply voltage provided. Statistics suggest that the ambient temperature be set at -10°C~85°C, which is what is estimated by the test. It's compatible with LVCMOS logic levels. It is a 10-bit IC that is designed for microprocessors specifically. The related electrical components for the base part number SL16010 can be found below. PLL is designed with 10 pins. The supply voltage should be maintained at 3.3V for high efficiency. It is part of the EProClock? series of electronic components. Clock PLL is configured with 2 output. For the time clock generator to operate properly, 18mA of supply current are required.

SL16010DC Features

Available in the 10-WFDFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V

SL16010DC Applications

There are a lot of Silicon Labs SL16010DC Clock Generators applications.

• DVD add-on cards for multimedia PCs
• 10 Gigabit Ethernet
• Microwave radio
• Electronic equipment
• Simple clock clean-up circuits
• FMCW Radar
• Aerospace and defense
• Main oscillator in receiver
• Bit synchronization
• Satellite receivers