SI5350A-B07220-GT

SI5350A-B07220-GT Overview

Clock generator is packaged in the way of Tube. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains this clock generator. As a result, frequency synthesizers can be found to contain 10 terminations. This clock generator ic should receive a voltage of 1.8V. PLL clock is mounted in the way of Surface Mount. There is a maximum voltage of 1.89V for this clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. The operating temperature should be kept below 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. An ambient temperature below -40°C may cause this frequency generator to malfunction. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B07220-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07220-GT Applications

There are a lot of Silicon Labs SI5350A-B07220-GT Clock Generators applications.

• Microwave point-to-point systems
• Phase modulation cellular systems
• Reference signals to RF systems
• Local oscillator source in receiver
• Microwave backhaul IF
• Communication infrastructure
• Myriad digital applications
• VSAT (Small Ground Satellite Station)
• Frequency synthesis
• Various decoding circuits