SI5344H-D-GM

SI5344H-D-GM Overview

In order to package it as a clock IC, the Tray package is used. In the 44-VFQFN Exposed Pad package, there is an embedded clock generator. There are a total of 44 terminations in this file. A voltage of 1.8V should be applied to this electronic frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximum voltage this clock PLL can handle is 1.89V. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. This clock-generating clock generator ic is able to synthesi2750MHze high-quality clock output frequency of 2750MHz. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. ALSO REQUIRES 3.3V SUPPLY can also be founded when using frequency generators.

SI5344H-D-GM Features

Available in the 44-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 2750MHz

SI5344H-D-GM Applications

There are a lot of Silicon Labs SI5344H-D-GM Clock Generators applications.

• Signal frequency synthesis circuits
• Camera systems
• MRI
• Laptops
• Telecommunication systems
• 1 Gigabit Ethernet
• HDD recorders
• Microwave point-to-point systems
• Clock recovery
• Ultrasound diagnosis