SI5335B-B08069-GM

SI5335B-B08069-GM Overview

As a clock IC, PLLs is packaged using the Tray method. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 24 terminations that can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. If the ambient temperature is below -40°C, the frequency generator may not start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5335B-B08069-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335B-B08069-GM Applications

There are a lot of Silicon Labs SI5335B-B08069-GM Clock Generators applications.

• Communication infrastructure
• FMCW Radar
• Time to digital converters
• Automatic control
• HDD recorders
• Satellite receivers
• Main oscillator in receiver
• Space communucation
• Mobile telephones
• Bluetooth transmitters