SI5335B-B05238-GM

SI5335B-B05238-GM Overview

Clock ICs are packaged using the Tray method. 24-VFQFN Exposed Pad contains this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 24 terminations found in this file. This electronic frequency generator requires a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generators can take up to 1.98V of power as a maximum supply voltageThe digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5335B-B05238-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335B-B05238-GM Applications

There are a lot of Silicon Labs SI5335B-B05238-GM Clock Generators applications.

• Simple clock clean-up circuits
• Frequency shifting decodes
• Local oscillator source in receiver
• Microwave point-to-point systems
• Instrument
• Clock recovery
• Closed circuit systems
• Clock signals to the high-speed Digital RF circuits
• Antenna automatic tracking
• Cable television converter boxes