SI5335A-B07826-GM

SI5335A-B07826-GM Overview

As a clock IC, PLLs is packaged using the Tray method. A Clock PLL is included with the 24-VFQFN Exposed Pad package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 24 terminations found in this file. A voltage of 1.8V should be applied to this electronic frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. The maximal supply voltage (Vsup) reaches 1.98V. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. For the clock, clock generator's output frequency should not exceed 350MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5335A-B07826-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B07826-GM Applications

There are a lot of Silicon Labs SI5335A-B07826-GM Clock Generators applications.

• Broadcast communication
• Wide area power system
• Antenna automatic tracking
• Automatic control
• CB radios
• Automatic control system test
• Radio receivers
• Laptops
• Phase modulation cellular systems
• Radiotelephones