SI5335A-B05131-GM

SI5335A-B05131-GM Overview

Tray-method packaging is used for clock ICs. Embedded in the 24-VFQFN Exposed Pad package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 24 terminations that can be found in frequency synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 350MHz. A clock PLL that starts up at a lower temperature may not function. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5335A-B05131-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B05131-GM Applications

There are a lot of Silicon Labs SI5335A-B05131-GM Clock Generators applications.

• Digital switching systems
• Frequency synthesis
• Smartphones
• Satellite navigation communication
• VSAT (Small Ground Satellite Station)
• Tracking filters
• Clock generation systems
• High-speed optical transport network (OTN)
• Microprocessor clock multipliers
• Carrier synchronization in wired communication