SI51210-A01AFMR

SI51210-A01AFMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. A Clock PLL is included with the 6-WFDFN package. Clock, Crystal is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. A clock-based RF synthesizer that provides a max frequency of 200MHz is available. This component can be conveniently installed on the panel thanks to the Surface Mount. As far as the supply voltage is concerned, clock PLL can be used with 2.375V~3.63V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. You can find related electrical components to the base part number SI51210. There is a 6 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Clock PLL is facilitated with 2 signal outputs to magnify output frequency as high as possible. This time clock generator requires a supply current of 4.5mA in order to operate properly.

SI51210-A01AFMR Features

Available in the 6-WFDFN
Operating supply voltage of 3.3V

SI51210-A01AFMR Applications

There are a lot of Silicon Labs SI51210-A01AFMR Clock Generators applications.

• Microwave backhaul IF
• DVD recorders
• Ultrasound diagnosis
• Precision auxiliary angle deflection measurement
• Symbol synchronization
• Medical equipment
• CB radios
• Computers to manage memory cards
• VSAT (Small Ground Satellite Station)
• Set-top boxes