RE46C126E16F

RE46C126E16F Overview

Sensor and detector interface is packaged wSensor and detector interfaceh materials from Tube.There is a 16-DIP (0.300, 7.62mm) package that is used in order to conserve space.This type of Smoke Detector is capable of providing superior performance.This mount is based on the Through Hole technique.As a general rule, the operating temperature should be kept at -10°C~60°C to avoid unnecessary cooling.Ionization is used as its input type.The use of 16 terminations is intended to prevent signals from reflecting off the transmission line's end.By using its base part number RE46C126, related electronic parts may be found.With a supply voltage of 9V, it operates.There are 16-pins on the device, so it is an electronic device.Mounted in the way of Through Hole.Sensor and detector interface uses Voltage as Sensor and detector interfaces output type.Improved efficiency can be realized when the operating supply current is kept at 9μA.When the supply voltage exceeds 12V, failures will occur.Sensor and detector interface is likely that the supply voltage will be below 6V at the time of failure.An electronic device classified under the subcategory of Other Analog ICs is designed using a unique formulation.Optimised for operation at power supplies of 9V.

RE46C126E16F Features

With 9V channels
operate temperature at the range of 9μA

RE46C126E16F Applications

There are a lot of Microchip Technology RE46C126E16F applications of sensor and detector interfaces.

• Resistive Elements Sensors
• Analog Signal Processing With Filter Characteristics
• Heating and air-conditioning
• Accelerometers
• Automation of Doors
• Position Sensing with Notched Wheels
• Mobile Devices
• Motor Speed Control
• sensing
• Motor drive controllers