Products
Manufacturer
RFQ
NEWS
ContactQS4A101QG
DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 5V QSOP
- Manufacturer: Integrated Device Technology (IDT)
- NO: 378-QS4A101QG
- Package: QSOP
- Datasheet:
- Stock: 6413
- Description: DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 5V QSOP(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 17Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Analog IC - Other Type | SPST |
| Power Dissipation-Max | 700mW |
| Nominal Supply Current | 3μA |
| Power Dissipation | 700mW |
| Max Supply Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 6 ns |
| -3db Bandwidth | 1.4 GHz |
| Off-state Isolation-Nom | 80 dB |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS4A101QG Overview
As the electronic part is packed in QSOP, international shipping is convenient. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. There is 17Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.25V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 4.75V is the lowest voltage the electrical component should receive. A voltage higher than 3μA may cause damage to the switch multiplexer. With a SPST analog IC integrated into the board. A voltage of 5V can be used to operate the electronic component. The electrical component supports 4 inputs. Temperatures over 85°C should not be allowed for the multiplexer to operate.
QS4A101QG Features
1 Channels
-3db Bandwidth: 1.4 GHz
QS4A101QG Applications
There are a lot of Integrated Device Technology (IDT) QS4A101QG Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- DSLAMs
- Digital access cross connects
- High reliability control systems
- Power routing
- Microprocessor Controlled Analog Systems
- PBX interfaces
- Isolation
- Audio and video routing
- 65 V DACs
