PT7C4512WEX

PT7C4512WEX Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are 8 terminations found in this file. Basically, a voltage of 5V should be applied to this electronic frequency generator. There is a maximum voltage of 5.5V for this clock generator. RF synthesizer is comprised of CLOCK GENERATOR, OTHER uPs, uCs, and peripheral ICs. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 4.5V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 200MHz. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. The RF synthesizer features ALSO OPERATES AT 180 MHZ AT 3.3V for improved clock signal output.

PT7C4512WEX Features

Supply voltage of 5V
Output clock frequency (Max) of 200MHz

PT7C4512WEX Applications

There are a lot of Diodes Incorporated PT7C4512WEX Clock Generators applications.

• High-speed optical transport network (OTN)
• Infotainment systems
• VSAT (Small Ground Satellite Station)
• Integrated phase noise in aerospace systems
• DVD add-on cards for multimedia PCs
• Radiotelephones
• FMCW Radar
• Mechanical devices
• Ultrasound diagnosis
• Frequency shifting decodes