PLL1706DBQR

PLL1706DBQR Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. Embedded in the 20-SSOP (0.154, 3.90mm Width) package is this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by CMOS, Crystal as its input. 1 circuits are implemented to access the electronic component's full performance. It provides a maximum frequency of 36.87MHz. PLL clock is mounted in the way of Surface Mount. Clock generators should operate with the voltage supply of 2.7V~3.6V. By calculating the test statistics, -25°C~85°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with CMOS logic levels. PLL Multi-Clock Generator is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. This part number PLL1706 is related to the following electrical components. PF synthesizers is equipped with 20 pins. In terms of the supply voltage, PLL clock can handle 3.3V volts. Fundamentally, this is a kind of Clock Generators clock PLL. The clock PLL here has 2 elements and has a very low jitter performance.

PLL1706DBQR Features

Available in the 20-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

PLL1706DBQR Applications

There are a lot of Texas Instruments PLL1706DBQR Clock Generators applications.

• Electronic countermeasures
• Local oscillators (LOs)
• Test and instrumentation equipment
• PMR (Professional Mobile Radio)
• Medical equipment
• Myriad digital applications
• Bit synchronization
• Time to digital converters
• Line cards used in telephone exchange
• Microwave point-to-point systems