PL123S-09SC-R

PL123S-09SC-R Overview

As a clock IC, it uses the Tape & Reel (TR) package. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. 8 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. There is a Clock PLL called Clock which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 134MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. There are 3V~3.6V available for use with this clock PLL. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. According to the base part number, its related parts can be founded. There is a 16 pin that is available on the digital clock generator. The maximal same edge skew (tskwd) can not be exceeded. There are 9 true outputs. A clock generator ic such as this would be well suited to the TR package.

PL123S-09SC-R Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
9 true outputs

PL123S-09SC-R Applications

There are a lot of Microchip Technology PL123S-09SC-R Clock Generators applications.

• Electronic equipment
• VSAT (Small Ground Satellite Station)
• Digital HDTV systems
• Modems
• Small signal recovery
• Line cards used in telephone exchange
• Remote telemetry and instrumentation
• Main oscillator in receiver
• Quenching?
• FPGA and processor clocks