PL123S-05SC

PL123S-05SC Overview

In order to package it as a clock IC, the Tube package is used. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. As a result, frequency synthesizers can be found to contain 8 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called Clock and it is designed as the input for this clock generator. To access the electronic component's full performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 134MHz is available. PLL clock is mounted in the way of Surface Mount. This clock generator would require a maximum supply voltage of 3.6V. It is safe to use this frequency synthesizer with a supply voltage above 3V. This clock PLL works with a supply voltage of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. The related electronic parts of part number PL123 are listed below. There is an available 8 pin on the clock generators. The maximal same edge skew (tskwd) can not be exceeded. 5 pins enable the digital clock generator's true output.

PL123S-05SC Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
5 true outputs

PL123S-05SC Applications

There are a lot of Microchip Technology PL123S-05SC Clock Generators applications.

• MRI
• Reference signals to RF systems
• Wide area power system
• High-frequency induction heating
• Space communucation
• Integrated phase noise in aerospace systems
• Local oscillator source in receiver
• Signal generator
• Simple clock clean-up circuits
• Main oscillator in receiver